As long as we’re surrounded by cars, there will be a demand for keeping them clean, including automatic car washes. Moving past the 2020 drop, we can see growth in the car wash industry market value, that’s expected to continue and is projected to exceed $68.9 billion by 2031.
Choosing an automatic car wash solution is incredibly important when maintaining vehicles, but water conservation is a commonly overlooked aspect that can impact the operation.
Let’s take a closer look at some adjustments that can lead to better cleaning results, improved eco-friendliness, and better resource management.
Water Conservation Factors
Different aspects of water usage can impact your automatic car wash performance and the resulting cleanliness. This is why you should consider several factors when shopping for car wash equipment.
Mimic Manual Washing
In an automatic car wash, you’re aiming for a cleaning process that achieves thorough results without excessive water use. Opting for high-pressure, low-volume systems that resemble manual washing techniques is ideal.
You should also check if the water recycling capabilities are optimal. Making sure the system is not too wasteful but not too restrictive either will optimize your balance of cleanliness and conservation.
Automatic Car Wash Equipment
Your equipment considerations need to include the type of washing system you’ll use. Let’s run down your choices:
Touchless
Touchless car wash systems are an excellent choice for many reasons. They offer contactless cleaning, have a lower risk of vehicle damage, and require minimal maintenance. Touchless systems are also a much more water-efficient choice than a typical friction wash and are environmentally friendly.
Yet another advantage of touchless systems is their high-tech sensors and computerized controls, which allow for better customization and can be a highly desirable feature.
Friction
Friction washing systems have some of the same advantages as touchless. They have a thorough cleaning capability, are highly effective on stubborn dirt, and have a lower water usage. The main difference is that friction washes offer physical contact instead of relying solely on water pressure.
Neither is inherently superior, and physical contact may, in fact, be ideal in some cases. However, it will come up short if you need to cater to customers with delicate vehicle finishes.
Chemical-resistant equipment
Cleaning chemicals can corrode and damage equipment over time, making them a possible danger when operating in certain settings, such as a high-volume car wash. That’s why we recommend using chemical-resistant equipment in these demanding environments.
You can find both touchless and friction systems with chemical-resistant components.
Consistent cleaning
Remember that it’s crucial to have consistent cleaning throughout the entire vehicle exterior in an automatic car wash. Uneven cleaning will show through missed spots and hard-to-reach areas and impact your service quality, and the lack of consistency in the wash will reflect on customer satisfaction.
Washing stages
Before you decide on car wash equipment, it’s best to review your washing process. You should have good coverage in all stages of the wash. You can also determine if any areas demand better attention and use your insight to plan which equipment will work best.
Pre-soak
Pre-soak is perhaps the most crucial stage when it comes to automatic car washing. It’s essential for loosening dirt and grime and offers all-around coverage that can also be used to target specific areas.
Main wash
The main wash stage is quite common and can distribute cleaning from multiple angles. However, it may fail to deliver consistent results throughout the vehicle. This can result in missed spots in hard-to-reach areas of vehicles.
Rinse and wax
Rinse and wax stages share the same benefits and drawbacks as the main wash – they’re efficiently integrated into the process but don’t always cover all of the areas of the vehicle thoroughly.
The best choice isn’t a clear-cut answer. You’ll usually see the best results if you use both touchless and friction systems and incorporate various washing stages.
Top 3 Automatic Car Wash Equipment for Running a Car Wash Business
M-LM-216 Touchless Inbay Automatic Car Wash Machine
High-Pressure Touchless Inbay Automatic Car Wash Machine System. It comes with an onboard Advanced vehicle width detection system and antifreeze draining. The Equipment uses Ultrasound Sensors to sensor the vehicle parameters which are saved in the Controller Memory for precise movement of the equipment. Also, the equipment uses Direct Inline Drive technology for Jerk-free motion and the long life of the Geared motors.
- New startups in Small towns and cities
- Individual Investors
- Tyre Shops
- Car Grooming Centers
- Small – Medium Service Stations
- Builders and Developers with lesser volumes
M-LM515B Inbay Automatic Car Wash Machines
The equipment has 3 brushes, 1 Horizontal and 4 Vertical Brushes. The Horizontal Roof Brush follows the contour of the car and the pressure of the brush is adjustable. Vertical Brushes are with Pneumatic Pressure Sensing System washing the sides of the car. The Brushes are made of Soft Foam which are very gentle on the car surface.
- Car Wash Centers
- Car Factories
- Auto Dealerships
- Mall / Shopping Area / Airport Parking Lots
- Fleeting Management and Services
- Office Parking Lots
- Residential Complexes
- Automobile Stockyards
M-BS0300Y Automatic Bus / Truck Wash Equipment (Gantry Type)
M-BS0300Y is an Automatic Bus / Truck Wash Equipment which comes with two hinged Brushes with Pneumatic Pressure Sensing. The Roof Brush is an optional addon which comes with Extended Mirror Program. The equipment is very easy to Operate and Maintain.
- Auto Dealerships
- Airport Bus Parking Lots
- Fleeting Management and Services
- Small – Medium Service Bus Stations
- Builders and Developers with lesser volumes
Find the Right Products
Mattias Car Wash Solution offers a catalog full of high-quality automatic car wash solutions. Whether you’re looking to install water-saving equipment or another accessory, we can help you out! We are the number one distributor of car wash tools and equipment and have a wide range of high-quality products.
Check out our page or get in touch for further information.
